Auto parts is indispensable item automobile class products, and silicone because of its characteristics of itself, is a silica gel in automotive applications, there are many many product planning with silica gel on the hardware combination to make corresponding silicone parts, generally its role is to jam, sealing and dustproof, waterproof, protection and resistance to fall off is easy to use and so on, then, How to ensure the quality of silicone auto parts?
Primary processing technology is to occupy the leading cause of bad products in the production processing engineering due to the size of the pressure problems may lead to deformation may be internal ripe soft silicone products, compared with the high and low temperature adjustment and the processing time of machine is broken and soft of products must, if cured at high temperature on the machine for a long time, If the mold is not released in time under the condition of curing, the product will be too brittle, simple cracking, too short time or too low temperature and early release of mold may also form the problem of product softening and deformation.
Raw material is second, under normal circumstances if quality silicone rubber material can ensure that the products are seldom appear deformation may be inner and outer package are not familiar with the wind, and to will not appear on the quality and performance of the problem, but if the silicone products manufacturer in combined filler material selection to reduce the cost on the silicon powder, which makes torn and generate degrees down, can not meet the use function, The product will be more brittle under high temperature time.